EagleSoC board is based on an original Cypress PSoC-5LP chip, Cypress CY8C5888AXI-LP096 32-bit ARM Cortex-3 CPU Core. It operates at frequency of 80MHz, contains 256KB Flash program memory, 64KB SRAM, and 2KB EEPROM. It includes 72 I/Os (62 GPIOs, 8 SIOs, and 2 USBIOs). The voltage level is ajustable from 1.2V to 5.5V with up to 4 domains.
EagleSoC Mini is based on the Cypress 68-pin PSoC 5LP chip. This board is primarily designed for affordability and portability. It is smaller than the EagleSoC Development Board by an approximate factor of 1.7 with dimensions of 100 mm x 60 mm. It supports either 3.3V, 5V, or Vadj for VDD, VDDD, VDDA, VDDIO selections. It also has separate digital and analog signals.
The EagleSoC Programmer is designed to support PSoC 5LP programming and debugging through the Serial Wire Debug (SWD) port. The PSoC 5LP chip hardwires SWD on port 1, therefore the voltage on that port is controlled by VDDIO1. However, VDDIO1 also controls ports 5 and 12. With EagleSoC Programmer you can leave these ports configured on either 3.3V or 5V voltage level depending on your project requirements. This device works with the PSoC Programmer and with the PSoC Creator IDE. It supports EagleSoC and Cypress PSoC 5LP development boards. Programming cable is included.